Відео

@@markjackson438 did you try to setup diffefent pull-up resistor value in the setting?

@@markjackson438 ua-cam.com/video/P-g_8cydoIU/v-deo.htmlsi=KIFqjkRmb3hj-WgJ

Thank you. I will try tomorrow and let you know the results

Just tried the variable pull-up. Now works perfect. Thank you

@@markjackson438 glad it helps and you're welcome. 🥰

Yeah didnt know that.... sure that can easily be tested. The thing with mine is that it displays in km/h . There are only 2 digit on the display. How can it display 3 digit as in 100km/h? Thats why u are stuck with 57.1mph display.

@@peminator basically you can also create your own GUI using Google Android Studio and slap other people's code from github regarding GPS functions, speed, weather info, time display, media player. At least, you can create a basic launcher for your own Android head unit. I thought about doing it but decided not too due to time taken to finish the project. Anyways, right now i am concentrating making my car AHU even smarter to automate with my Home Assistant app. Ie. "Turn on driveway light after sun down when my car's entering home region." You'll see. 😆 I am not too concerned about car launcher in general anymore because at the moment i use Home Assistant app as my display.

@@hrvat-hb2sn some andtoid head units dont implement touch calibration function into the firmware due to hardware limitation. So, if it doesnt work, you're out of luck. ❗️

@@lavithhcm any other option?

@@hrvat-hb2sn find out exactly what android head unit you have or at least what version of the firmware is. Cross reference that with the known info to see if it can support touch calibration. Anyways, this is a long shot. Best of luck man!

@@NoodlesNJ1 that's even better.. i hate philips head screws.

it can only mean that your android head unit firmware doesn't support that function. what you can do is to use USB mouse connected to USB port of the AHU and go into setting parameter to find out its Touch Calibration setting. If this doesn't work, you just might have a dead touch screen which is hardware problem which usually can't easily be fixed.

does it work without the Android head unit? meaning does your steering buttons work before?

there is no reset code. Just press the reset button top left labeled as RST

@@TheRariza23 most likely due to installation we screwed up the touch calibration setting. Hope it helps man.

To be honest, i have not got any issue with the fake one except if i back pedal too much the chain would drop on me while the genuine one doesnt do that. Besides that, since i am only 140lbs so I havent experince cracked links or broken chain. It is just my own experience with the fake chain thinking i got a good deal on it. 😂😂 Honestly for my shitty bike and i dont care about wearing all other parts, i would order a chinese made brand chain instead of fake Shimano.

If you have a lot of shavings coming out from your chain, it means the roller pins are not heat treated right (surface hardness of roller pin). The effect is that your chain will get elongated and streched too much! With that said if the roller pins are heat treated too hard they become brittle and might break on you. So there is a fine balance between soft vs hard pin. And most cheap chain dont bother with hard pins. 😅

@@lavithhcm I don't think it's from the roller pins, but maybe you're right. Looks to me like the teeth are grinding on the chain. There was a nearly alarming amount of shavings. Some say it happens when shifting under load, which I do sometimes.

@@mortona42yt Shifting under load also depends on what kind of gearing you got, for example on a old mountain bike 3(front)x8(back). Shifting under load is forbidden, while if you got them city bikes with internal gear with for example 6/7/8 gears. You can shift under load just as fine as shifting while back pedaling... Even some new gears shifts better under load than without. What bike and what kind of shifting do you got? And are you sure it is not just one bad link? (if the chain gives while back pedaling at the same point, you do know.)

@@Desperado070 Kona cyclocross with 3x10 (I swapped from 2x). New cassette too, so it has to be this cheap chain?

No.2 is authentic genuine Shimano chain. Same with No.1

Not sure if I understand your question but here it is.... The my front camera (inside the car) is connected thru my android head unit USB port. The rear backup camera (license plate) is connected thru special wire that is labeled "Reverse Camera" from the AHU pinout. If you have multiple cameras (front left, front right, left, right, rear left, rear right ) of course there is also the pinout label (in your case 6pin) to let you know how to connect them. When you have 6 cameras wired up and connected to that 6 pin, you can use 360 camera app. Since I use only 1 license plate camera, I don't use 360 camera app because it makes me confused what is left and what is right. Hope it helps!

@@lavithhcm oh, i see, you are using a USB camera.. The 360 is 12-pin I believe, the rear cam is 6-pin.. there is 6-pin for USB but I need to get a USB DAS front Cam.. SOrry I though you where using two cams one Front and one in the rear coz that is what I was trying to do..

I can turn it on thru the app and leave it on for extended period and I have no issue with it overheating. My is just a dummy backup camera and it doesn't do any processing like file compression or anything like that (that's why it is cheap) The Android head unit camera app does the actual recording and save it in AHU memory. I don't use 360 app because I have only 1 backup camera. If you have many cameras install around the car, 360 camera app makes sense.!

@@lavithhcm I have on car has 360, but another im trying to install Rear&Front(not sure how to wire it-prolly DPDT 6-pin on-off-on toggle).. I havent looked into it that much yet but it seems there is no settings option for the 360/Rear cam app to stay on while driving..

Only certain metal parts i would buy. But for the arm, i would rather stick with plastic. Metal parts have too much play in them thus making the car acting weird. You can always shim it though. I did buy some metal parts for this RC car/truck.

Some models just don't come with RGB leds at those so you cannot change it. It's hardware limitation so not much you can do. Best of luck! When i first reset my unit, those soft buttons cycle thru various colors so i know my unit has RGB leds.

ua-cam.com/video/FZGIHIT8tZ8/v-deo.htmlsi=ERxksZtBxrjzzA39

So did you strip the gear.? I doubt it though. I have broken the wheel axial using 3s battery runing in water but never stripped the gear. 😆 i find it best using marine grease with this cheap rc. If you use fluid, make sure it's sealed otherwise the fluid is just spun off the diff. Too thick fluid is not good either. Anyways, tube of marine grease will last long time. Best of luck!

What you can do is to use USB mouse connected to android head unit. Use the mouse to go into setting menu and find touch calibration setting in there. Best of luck!

i think i did pay for the shipping company like 45CAD for duty. Anyways if you decided to buy it, you can purchase thru this link. www.formbot3d.com/products/voron-24-r2-pro-corexy-3d-printer-kit-with-m8p-cb1-board-and-canbus-wiring-system?DIST=Rk9OHVk%3D&VariantsId=10457 Really appreciated! Thanks

Your touch hardware is bad? Meaning your touch screen is screwed up! Anyways, another method is try to use PC usb mouse to access touch calibration menu and from there you can recalibrate your touch screen. If that doesnt work. I dont know what else. Best if luck! 🥰

Lâu ngày ko có chơi quad, nên chắc cũng lú về quad rồi. 😁😁😁

Yeah after using this unit for over 2 years and i have not noticed it would mute my music when reverse. 🤣

sure.... it's a car launcher app that you need to download from Google Play Store. You can either use "free" or "paid." I am using the paid version of CarWebGuru. ua-cam.com/video/z8CQZXAR0UY/v-deo.htmlsi=9BAMMCqi03iMGzTE

Glad it helped. Cheers

did you try this to calibrate your touch setting? ua-cam.com/video/i3Ha0OHqNIk/v-deo.htmlsi=_X2QdK9jdAwCc_At

yeah get a 3S battery for it and it flies. 🙂

gotta see this clip too ua-cam.com/video/Xdu1esoqVPc/v-deo.htmlsi=Ne5_xroy4b8TcF8n I ran 3S in it and snap the dogbone. :-) It does fly on water. LoL

@@lavithhcm gonna be the first rc car I've had since I was a kid, I'm pretty hyped. This one seems like the best cheap sorta hobby level RC

@@BoggedBogdanoff you will break something. That I know for sure! So replacement parts are a must.

ua-cam.com/video/z8CQZXAR0UY/v-deo.htmlsi=wIKRxYY5mcSMflZ0

You mean like it's hard to install it into your car. Yeah, me too it took me 2 days to figure out why the android screen wouldnt sit flush to the housing. I had to grind off some plastic material for it to fit. Be patient when installing it. Take care of the RCA connectors and use some sort of clamps (ziptie works too) to hold those connectors in place. When u leave them loose, there might be static noise down the road. Let me know if u need any help regarding the unit. Cheers

Yes!

Hahaha... yes yes I wish.

Yup... no connector to connect antenna.

Yeah maybe your android unit firmware does not support that feature. Can you somehow go into setting menu and search for touch calibration?

tunggu sekitar 30 detik, akan mati

You are welcome. Hope it helps.